All Products
Showing 76–90 of 166 results
-
-
-
-
6 channel remote control receiver and transmitter
250৳Features: 6 Independent Control Channels Includes RF Transmitter (Remote) and Receiver Module Stable long-range wireless control Each channel supports ON/OFF control Easy pairing and operation Low power consumption Reliable and durable design
-
PD22.5W Transparent Power Bank Case DIY Case Fast Charging With Display
750৳Specification Product Colour: Blue Input voltage: Micro input: 5V2A, 9V2A, 12V1.5A Type-C input: 5V3A, 9V2A, 12V1.5A Output voltage: Type-C output: 5V/3A, 9V2.2A, 12V1.6A USB output: 4.5V5A, 5V3A, 9V2A, 12V1.5 Battery Cell: 18650x 8 Note: This type of mobile power supply needs to be charged and activated several times after installing the battery before use…
-
-
-
TPS61088 QC 3.0 QC 4.0 Boost Module 3.7V 4.2V to 5V 9V 12V USB Fast Charging Module
215৳Input Voltage: 3.2V – 4.2V (supports Li-ion batteries) Output Voltage: 5V / 9V / 12V (Selectable) Output Current: Up to 3A (depending on voltage) Chipset: TI TPS61088 High-Efficiency Boost Converter Conversion Efficiency: Up to 96%
-
PD Trigger Module – Quick Charge QC2 QC3 AFC PD2.0 PD3.0 Fast Charging Module
165৳Fast charge support protocol: PD2.0/PD3.0, QC2.0/QC3.0, AFC Support voltage: 5V, 9V, 12V, 15V, 20V (voltage step is not supported) Voltage adjustment method: According to the table on the back of the board, adjust the DIP switch to control the voltage output Size: 3.1*2*cm Net weight: 3.5g
-
4S/5S 100A BMS 14.6V / 18.2V LiFePO4 & Ternary Lithium Battery Protection Circuit Board with Balancing
375৳Specification: Battery Support: 4S (14.6V) & 5S (18.2V) Battery Type: LiFePO4 / Ternary Lithium (Li-ion, Li-Poly) Continuous Discharge Current: 100A Charging Voltage: 14.6V (for 4S LiFePO4) 18.2V (for 5S LiFePO4) Balancing Function: Yes (active balancing between cells) Protection Features: Overcharge protection Over-discharge protection Overcurrent protection Short circuit protection Temperature protection Dimensions: Approx. 65 × 45…
-
XL4016 20A Step-Down Buck Converter CC CV Power Supply Module | DC 6V-40V to 1.2V-35V Voltage Regulator
435৳Specifications Input Voltage: DC 6V-40V Output Voltage: DC 1.2V-35V (adjustable) Output Current: Up to 20A (adjustable) Power Output: 300W (max) Conversion Efficiency: ≥ 95% (depending on load) Control Modes: Constant Current (CC) and Constant Voltage (CV) Ripple Frequency: 150kHz Cooling: Built-in fan for heat dissipation Protection: Overcurrent, overheat, and short circuit protection Dimensions: Approximately 60mm…
-
VHM-314 Bluetooth Audio Receiver board Bluetooth 5.0 mp3 lossless decoder board
115৳Specifications: Power Supply ：3.7-5V SNR ：90dB THD+N： -70dB Crosstalk -86dB DNR：91dB Support Profile A2DP/AVCTP/AVDTP/AVRCP/HFP LOS >15m
-
3S BMS 20A Li-ion Lithium Battery 3×18650 Charger PCB BMS Protection Board Module
55৳Maximum discharge current: 20A Overcharge detection voltage: 4.25-4.35V±0.05V Three batteries (18650) can be connected to the module simultaneously Operating temperature: -40~50° Storage temperature: -40~80°
-
-
End of content
End of content