Input: AC 100-240V 50/60Hz. Output: DC12.6V 3A. Inner Positive(+), Outer Negative(-). Charger Protection: short circuit, over load, over-current. 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum.The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking. LED: red light — charging, green light…
Maximum discharge current: 20A Overcharge detection voltage: 4.25-4.35V±0.05V Three batteries (18650) can be connected to the module simultaneously Operating temperature: -40~50° Storage temperature: -40~80°
Microcontroller: ATmega328 Compatibility: Fully Compatible Microcontroller Card. Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limit): 6-20V Digital I/O Pins: 14 PWM Digital I/O Pins: 6 Analog Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 32 KB Flash Memory for Bootloader: 0.5 KB…
Transparent blade DC brushless fan DC7.4V, red positive and black negative, wide working voltage range 5-12V, the air volume can be adjusted by adjusting the voltage. Note that the positive and negative poles cannot be connected in reverse.
Quick Charge 3.0 Power bank Circuit Type C Fast Charging Port 1 USB Output 3A Max Output: 5-6V 3A, 9V 2A, 12V 1.5A maximum Quick Charge Indicator Fast Charging Mode
The mini brushless fan has a relatively large air volume and was originally used on high-end fans. Suitable voltage DC7.4-12V, power 4W at 12V, power 1.5W at 7.4V. The fan can also run at 3V but the air volume is small. The wiring is red positive and black negative. The other three wires are the…
